Product model: WLTOYS XKA500 RC Plane

Product size: wingspan 350mm, captain 270mm, fuselage height 150mm

Color box size: 38*18.7*20.2CM

Product material: EPP+ engineering plastic

Flight weight: 70G (including battery)

Gliding flight time: about 12 minutes

Charging time: about 80 minutes

Remote control mode: 2.4G four-channel

Remote control distance: about 150 meters

Drive motor: hollow cup motor 1020 *1

Battery details: LI-POLY 3.7V(400MAH) 20C

Remote control dry battery: 4 AA (not included)

Charger details: Special USB charging head 5V 600mah (the lamp is off when charging, and the red light is on when charging)

WLTOYS XKA500 RC Plane accessories details:

Color box packaging *1

Remote control *1

Aircraft *1

Instructions *1

usb charging head *1

Blade set *1

Battery *1

Rear landing gear *1

The left and right landing gear are *1

Phillips screwdriver *1

WLTOYS XKA500 RC Plane product features:

1. Use four-channel design, easy to learn, very suitable for beginners to use. The blades, motors and wings can be removed for easy replacement, and the flight control system has two new receiver adapters, 5V for FUTABA(S-BUS) and other receivers with (S-BUS) ports, and 3V for DSM receivers. Customers can control the product through an external receiver.

2. Optional built-in six-axis gyroscope flight self-stabilization system, with 1020 motor super power deceleration group, more stable route locking. Remote control 6G/3D mode switch at will, 6G mode is suitable for beginners flying. 3D mode can achieve somersault, left and right roll, reverse flight, it is recommended to fly the aircraft to a certain height in operation, to avoid improper operation and reduce the possibility of falling.

3. USB special charger is configured, which can effectively protect the battery and prevent the battery from overcharging.

4. The standard battery LI-POLY 3.7V(400MAH) 20C, large capacity, super endurance, can continue to glide for about 12 minutes.

5. The unique buckle structure design of the wind blade component can automatically fall off when the wind blade hits the obstacle, which can protect the motor more effectively and make it not easy to damage.

Introduction to 3D/6G mode of WLTOYS XKA500 RC Plane:

In 3D mode, the aircraft can accurately lock the flight attitude and react quickly, making stunts a breeze and greatly improving flight stability and accuracy. When switched to the 6-axis mode, the aircraft will show excellent stability, regardless of the situation, once the rocker is released, the aircraft will automatically maintain a smooth flight attitude. This mode is easy to operate and is especially suitable for beginners to experience the fun of flying.

The body of the WLTOYS XKA500 RC Plane is made of EPP material, which is a new type of environmentally friendly pressure buffer insulation material. The appearance is smooth and very impact-resistant. In addition, the aircraft's flight control system has two new receiver adapters. 5V is suitable for FUTABA(S-BUS) and other receivers with (S-BUS) ports, and 3V is suitable for DSM receivers.

Four-channel features of the WLTOYS XKA500 RC Plane:

First channel (aileron) : The two ailerons that control the fixed wing change the attitude of the aircraft. In multiple rotors, attitude changes used to control and change the direction of fuselage roll.

The second channel (lifting) : control the horizontal tail of the fixed wing, so that the fuselage looks up and down, so that it rises and falls. In multiple rotors, it is used to control the fuselage forward and backward.

The third channel (throttle) : controls the engine or motor speed. When the rocker is pushed upward, the motor speed increases and the flight speed increases.

Fourth channel (rudder) : The fixed wing is used to control the vertical tail, thereby changing the nose orientation. The multi-rotor is also used to change the nose orientation, but the intuitive feeling is that the fuselage is doing a spin.

WLTOYS XKA500 RC Plane Operation precautions:

1. When the aircraft is out of control or the operation is wrong, and the collision is about to occur, it is necessary to immediately close the throttle and stop the power output of the aircraft, which can minimize the damage of the aircraft. In the event of a collision, the confiscation of the throttle may cause the motor and circuit plate to jam and damage.

2. After the aircraft is used, pull out the battery. If the battery is not pulled out for a long time, the battery will be overdischarged and the battery life will be shortened.